Quantum-data 881 Bedienungsanleitung PDF herunterladen (Seite 98)

80 Chapter 2 Testing Video Displays

To run the ImageShift utility through the command line interface:

1. Establish a session with the generator using either HyperTerminal over a serial

connection or Telnet over an Ethernet LAN. See “Configuring the generator’s serial

port” on page 32 or “Establishing a Telnet session with the generator” on page 34.

2. Set the path to the imageshift files using the ISHP command. For example:

ISHP tffs0/library/imageshifts

3. Enter the following commands to display the list of imageshift files.

ISHQ? //Displays the first 5 imageshift filenames

ISHQ? //Displays 5 more imageshift filenames

4. Load an imageshift file and apply the image to hardware. For example:

ISHL Newshift //Loads the values from the imageshift file named

//Newshift

ISHG 1 //Initiates (gates on) the imageshift function

ISHU //Applies the values to the hardware

5. Apply the imageshift file to the hardware using the ISHU command. For example:

ISHU //applies the imageshift file to the hardware

To stop the ImageShift utility through the command line interface:

1. To stop the Imageshift enter the following command.

ISHG 0 //Stops (gates off) the imageshift function

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 125 126

Keine Kommentare

Quantum-data 881 Bedienungsanleitung Seite 98